Acnodes KD 9250 - Manual (Page 3)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
KD 9250
1U Rack mount 15.6” LCD keyboard drawer
CHAPTER 1 GETTING STARTED
1-1 Overview
KD9250 LCD console integrates keyboard, widescreen LCD display and touch pad in a drawer
type worktable and provides a convenient space-saving operation mode for KVM switch technology.
The cover is a widescreen LCD display, while the base is keyboard and touchpad. Metal Buckles on
the left and right are moved aside to open the cover. It can be operated once the KVM module is
pulled out. Once the operation is completed, push the KVM module back to the rack.
KD9250 LCD console is a control device integrating 15.6” widescreen LCD. 86-key keyboard
and touchpad mouse. You can access multiple hosts using the LCD console while saving money and
efforts.
LCD KVM console is the best choice to save time and efforts. Since all hosts can be controlled
from a single main control terminal, using the widescreen LCD KVM console: (1) avoids the cost of
keyboard, mouse and monitor of each host; (2) saves work space; (3) saves power; (4) saves the
trouble of moving from one computer to another.
* For Mac and Sun hosts, USB cable must be used for connection.
1-2 Function & Features
KD9250LCD KVM display is integrated to a drawer type worktable of 1U height to facilitate
rack installation. Supported resolution up to 1366 x 768, 75 Hz. It meets the 1U height of rack specifi-
cations and can be installed into 19 inch rack cabinet. No need to install additional software or hard-
ware.
1-3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) VGA, SVGA or Multisync card
Note: the max. resolution of the integrated widescreen LCD display is 1366x 768. Make sure the
resolution of any connceted computer does note exceed this resolution.
(2) PS/2 or USB keyboard and mouse port.
1.3.2 Cables
The switch can be connected to hosts using PS/2 or USB connector depending on the different KVM
cable.