Acoustic Research PW1000 - Manual (Page 14)

Chapter 2: Setting Up the A/V Pass-Through Jacks
25
PW1000 Back Panel
TV Back Panel
VIDEO R AUDIO L
VID INPUT
1 2
Composite Video and Stereo Audio (TV Only)
The PW1000 offers one set of pass-through Composite Video and Stereo Audio jacks
on the front and back of the unit.
To set up the Component Video and Audio SpeedPass:
1. Make the video connection.
Connect one end of a composite video cable to the VIDEO jack on the back of
the PW1000. Connect the other end to an available Video input jack on the back
of your TV.
2. Make the audio connection.
next to the VIDEO jack on the back of the PW1000, and connect the other set of
plugs to the audio input jacks next to the video input you used on the back of
your TV.
IMPORTANT: Make sure you make a note of the inputs you’re using for each
connection.
Chapter 2: Setting Up the A/V Pass-Through Jacks
26
MP3 Audio (TV Only)
The PW1000 offers a set of MP3 audio pass-through jacks on the front and back of
the unit. The jack on the front is a single 3.5mm stereo audio jack, commonly used
on portable audio devices. The jacks on the back are a stereo pair (left and right).
To set up the MP3 Audio SpeedPass: Connect one set of plugs from a stereo
other set of plugs to an available set of audio input jacks on the back of your TV.
IMPORTANT: Make sure you make a note of the inputs you’re using for each
connection.
USB (TV Only)
To set up the USB SpeedPass:
IMPORTANT: Make sure you make a note of the inputs you’re using for each connection.
PW1000 Back Panel
TV Back Panel
AUDIO
PW1000 Back Panel
TV Back Panel
USB IN
TV Only
Blu-ray Satellite or cable
TV
WARNING:
intended for data use only.