ACR&Artex RCL-600A - Manual (Page 8)

Y1-03-0139H 7
Figure 4
3.5 Installing a second remote control panel (slave)
The second remote control panel is optional. This section refers to Product No. 1942 only.
The second Remote Control Panel may be mounted similarly to the first. The second remote control panel is wired parallel
to the first remote control panel. Connect cable to sockets on back of control panels. The master panel should have cable
plugged into top socket row 2. The slave panel should have the cable plugged into bottom socket row 1 (refer to Figure 5).
Figure 5
VINYL CABTYRE CABLE
300V
– VCTF – 0.5sq – 15c
VINYL CABTYRE CABLE
300V
– VCT – 0.5sq – 15c
NOTE: The maximum number of controls
cannot exceed two.