Acroprint ARES Express - Manual (Page 23)

Messages (Tab)
This Tab enables the user to create, name and assign all types of messages (incident messages too) he wants reported.
1.) Select the Messages Tab
2.) Press the
“Add” button
3.) Key in the message on the “Detail” column.
4.) Press the
“Save” button.
5.) The system will assign an automatic code to the message . This code is the code that has to be recorded by the guard or supervisor with his M6000
Recorder and Message booklet.
For the Message System to operate correctly, It is of utmost importance to instruct (train) Guards and/or Supervisors to first make the recording (touch
the station iButton) where he detects an incident is taking place, then record the code of the incident in the keypad (where and what) and finally re-
cord/touch the “E” enter button.
For isolated messages, in other words messages that are not or should not be related to recording stations, persons or elements, the supervisor or guard
must record/touch the 0 Key on the Keypad Booklet and then record/touch the keys of the message code. Example if a gas leak
(code 11) is detected in
an area or site there is no nearby recording station the supervisor must record/touch the following sequence of keys ( 0,1,1,E)
Typical messages can be: Intruder, Fire Hazard, Broken Door, Broken Window, Slippery Floor, Water Leak, Gas Leak, Burned Light Bulb, Unlocked
Door, Etc.
If you desire to list your assigned Messages, select the
List button on the menu bar to access a print preview; to print select the printer icon.
23