Acroprint Time Q +Plus - Manual (Page 12)

12
supplied with the system. If your computer has a 25-pin serial port
you will need a 9-pin to 25-pin adaptor available at most computer
stores.
4. Connect the adaptor to
the RS-232 serial port
located on the rear of
your computer.
5. Replace the access door
on the terminal.
3.4 Printer connections (Stand-alone Operation or with
Additional Printer)
The Time Clock terminal may be connected directly to an IBM ® PC
compatible printer. Reports can be printed without a PC.
3.4.1 Parallel printer connection
The terminal can accommodate a standard parallel printer
cable available at most computer stores. The cable requires
a 25-pin connector (to Time Clock terminal) on one end and
a 36-pin Centronics type connector (to printer) on the other
end.
3.4.2 Serial printer connection (Stand-alone Operation Only)
The serial printer cable is unique due to the phone jack
interface to the RS 232 port. Contact Acroprint to order this
cable.
Terminal installation