Activeforever Global Lift Commercial Series Portable Lift 450 - Manual (Page 7)

STEP 4: Cementing the anchor in the concrete.
• You will need 20lbs of Quick dry Anchoring Cement (Commercial Grade Quikrete Exterior
Use Anchoring Cement) to complete the installation. You can purchase at any hardware
store in your area. Read the label and follow manufacturer’s instructions.
• Start pouring into the 3 holes evenly until you fill them up, make sure not to overfill the
Holes so that it does not create more work to scrap excess concrete off.
• Let the concrete set for 24hrs, Remove the template then sand the area with a
sand stone to smooth the finish. Make sure the anchor’s are flush with the concrete
(picture B)
• You are now ready to install your Commercial Series lift.
Picture A Picture B
www.ActiveForever.com