Activeforever Krown Door Knock Alert Flasher - Manual

DIRECTIONS
Slide battery cover 1 out. Plug the 9V battery 2 to
battery connector. Insert battery to the compartment.
Replace the battery cover 1 .
Choose the right bracket for your door. Insert the
selected bracket 3 to the inlet hole 4 . Save other
bracket 5 for later use.
Clip the doorknock device to the inside of any door.
Switch the selector 6 to doorknock function. Knock on
other side of the door to activate the unit.
To use as a flashlight, slide down the selector 6 from
OFF position
6
9V
2
4
1
5
3
Instruction: Doorknock 125