Activeforever Signature Series Electronic Stethoscope Adult Black (Adult, black) - Manual (Page 8)

Specifications
Name MABIS ® Signature Electronic Stethoscope,
and Model 10-400-020
Sound Amplifier 3 dB ±2% of each volume level
Storage Temperature -4°F - 140°F (-20°C - 60°C) and
15% to 95% relative humidity
Usage Temperature 23°F - 140°F (-5°C - 60°C) and
20% to 95% relative humidity
Latex-Free This product does not contain any latex ingredients
Eartips Two pairs of screw-on plastic eartips are included
Dimensions 22” Y-tubing
Batteries (3) LR44 or equivalent
#91-032-400 08/07
©2007 MABIS Healthcare
Specifications subject to change without notice.
The MABIS Signature Electronic Stethoscope meets the norms:
EN IEC 60601-01, EN EC 60601-1-2 (EMC), and EN IEC 60601-1-4
Production certified ISO9002/EN460002.ISO13488
The MABIS Signature Electronic Stethoscope is a medical appliance of class
CL 1 and complies with the relevant norms of the guideline MDD93/42/EEC.
13 14
Troubleshooting
Will not switch on.
Dead batteries or
improperly installed
batteries. Check batteries.
Replace all three (3)
batteries if necessary.
Will not change modes. Batteries are weak.
Replace all three (3)
batteries.
Device is ON, but
cannot hear sounds. The volume may be set
too low. Increase the volume
using the “+” button.
High background noise
The volume setting
may be too high. Reduce the volume
using the “-” button.
It is difficult to hear
sounds.
Volume is set too low.
The stethoscope is set
in the wrong Mode.
Use the “+” button
to increase the volume.
Use the “M” button to
change the Mode.
CONDITION POSSIBLE
CAUSE
CORRECTIVE
ACTION
91-032-400 Instruction Manual 8/30/07 8:36 AM Page 15