Activeforever Omron HEM-629 Wrist Blood Pressure Monitor - Manual (Page 8)

BATTERY INSTALLATION
8
Low Battery Symbol
MEM
SET
STAR T STOP
MEM
SET
STAR T STOP
MEM
SET
STA RT STO P
1. Press both sides of the battery cover and lift the cover off in the
direction of the arrow.
2. Install 2 “AAA” size batteries so the +
(positive) and - (negative) polarities match
the polarities of the battery compartment
as indicated.
3. Replace the Battery Cover.
Make sure the battery cover is securely
in place.
BATTERY REPLACEMENT
Initial Set-Up
When the Low Battery Symbol appears on the display screen
remove all the batteries. Replace with two new batteries at the same
time. When the Low Battery Symbol blinks a brief period of usage
remains. Long life alkaline batteries are recommended.
NOTES:
• Measurement values stored in the memory will not be deleted
during battery replacement.
• After replacing the batteries, reset the date and time. Refer to page
9, Setting the Date and Time.
• Dispose of batteries according to applicable local regulations.
HEM-629-IM-US-8094 9/27/05 4:09 PM Page 8