Activeforever Invacare Lightweight Aluminum Transport Chair - Manual (Page 28)

SECTION 7—CASTERS
Transport Chairs 28 Part No.1125095
FIGURE 7.1 Replacing/Adjusting Front Forks
Replacing Front Casters
NOTE: For this procedure, refer to FIGURE 7.2.
1. Remove the hex screw, washers and locknut that secure the front caster to the fork.
2. Install the new front caster onto the transport chair by reversing STEP 1.
3. Repeat STEPS 1-2 for the opposite front caster if necessary.
FIGURE 7.2 Replacing Front Casters
Caster Headtube
Front Caster
and Fork
Nylon Washer
Dust Cover
Locknut
Hex Screw
Fork
Front Caster
Locknut
NOTE: Dust cap not shown.