Electrical inspection and maintenance pass/fail, Electrical inspection and maintenance, Pass/fail – Activeforever Invacare Semi-Electric Home Care Hospital Bed User Manual
Page 19
SECTION 3—TROUBLESHOOTING
Part No 1114836
19
Electrical Inspection and Maintenance
❑ Inspect all electrical bed components for damage or excessive wear (i.e. cracked or
broken housings, or worn components).
❑ Check pendant, power and motor cords for chafing, cuts or excessive wear.
❑ Make sure all plugs are fully attached and free of damage.
❑ Make sure cable lock on junction box is properly positioned and locked
❑ Check all functions:
• Head raises and lowers properly.
• Foot raises and lowers properly.
• Bed Ends raise and lower properly.
Pass/Fail
❑ PASS: Bed and all components have passed all of the above inspection criteria and the
bed is ready for placement into a client’s home.
❑ FAIL: Bed, or any component, has failed any of the above inspection criteria. Tag the
bed or component with a complete description of the failure(s) and have the bed
serviced.