Instructions – Activeforever Standers EZ Adjust Bed Rail User Manual
Page 2
Advertising
Instructions:
1. The EZ-Adjust Bed Rail can be positioned on either the left or right side of a bed
(left side shown in Figure 1).
2. Remove all parts from the box and place the parts on a flat surface.
3. Review Figure 2 below to become familiar with all of the parts.
4. Attach L-SHAPED TUBES (Item-2 and Item-3) to MAIN RAIL (Item-1), as shown
in Figure 2, with BOLTS (Item-6).
5. Slide the loops of the SAFTEY STRAP (Item-5) over the L-SHAPED TUBES
(Item-2 and Item-3), as shown in Figure 3.
Figure 2
Figure 3
6. Attach CROSS BAR (Item-4) to L-SHAPED TUBES (Item-2 and Item-3), with
BOLTS (Item-6) shown in Figure 4.
Figure 4
Advertising