Activeforever Invisia Collection Corner Shelf with Support Rail User Manual

Invisia, Corner shelf

Advertising
background image

Page 1 of 4

www.ActiveForever.com

Invisia

Corner Shelf

Installation Instructions:

CS-CRP / CS-PCW

-Wood studs.

-Adequate wood structural backing.

-No aligning structural wood studs.

-Suitably strong structural wall board.

#10 x 2" S/S

Screw and Lock

Washer
#10 x 2" S/S Bolt

with SnapToggle®

toggle bolts

STRUCTURE BEHIND WALL

(Wall Surface: Tile on 1/2" min cement board)

FASTENER

COMBINATION

THANK YOU...

Thank you for purchasing the Invisia™ Corner Shelf. We are

confident that you will find the unique design and durable

construction of this product to be of great assistance in your

daily routine.

To fully enjoy your Invisia™ Corner Shelf, please take a few

moments to read these instructions. You should store these

instructions in a safe place for future reference.

SAFETY CONSIDERATIONS

CAUTION: It is your responsibility to see that your Invisia™

Corner Shelf is properly assembled, installed, and cared for.

Failure to follow instructions in this manual could result in

serious injury. Support rails can be slippery when wet - use

this product with caution.

INVISIA™ CORNER SHELF INSTALLATION

The Invisia™ Corner Shelf should only be installed in areas

where the mounting surface is structurally sound, in the

corner between 2 walls that are relatively perpendicular to

each other. Strengthening modifications may be required (see

page 3 for details). Should not be installed in fiberglass /

acrylic shower enclosures with insufficient stiffness and

strength. Should not be installed into metal studs. If you are

not equipped to undertake the outlined work we recommend

that you have your Invisia™ Corner Shelf installed by a

qualified contractor. Suggested maximum user weight of

support rail is 350lbs/159kg, however this rating is conditional

upon suitable fasteners and supporting surface. Tray is not a

weight bearing surface.

WARRANTY

All HealthCraft™ Products are covered by a one year limited

warranty with the exception of hand grips which are subject to

normal wear. Buyer hereby indemnifies, agrees to hold

harmless and defend HealthCraft™ Products Inc. from and

against any and all liabilities, claims, (founded and

unfounded), losses, damages, costs and expenses (including

without limitation consequential damages and reasonable

professional fees) resulting from buyers specification,

application, or improper use of goods described hereon;

buyers omission or neglect.

HealthCraft™ Products Inc. does not assume any liability for

damage resulting from services performed by others or faulty

installation, misuse or misapplication of goods sold by

HealthCraft™ Products Inc.

HealthCraft™ Products Inc. shall not be liable for prospective

profits or special, indirect, or consequential damages, or for

the cost of any corrective work done without HealthCraft™

Products Inc. prior approval. HealthCraft™ Products Inc. total

liability hereunder shall in no event exceed the purchase price

of the goods specified hereon.

TOOLS REQUIRED

• Level / Stud Finder

• Personal Protective Eyewear

• Hammer

• Carbide tip drill suitable for tile

• Center Punch

• Protective blanket

FASTENERS: INSTALLATION & MAINTENANCE

The Invisia™ Corner Shelf must be secured to the wall with

fasteners appropriate to the structural material. Inspect, or

have inspected (and tighten if necessary) the screws on a

monthly basis. Included are 2 sets of mounting hardware for

different wall applications.

For tile walls judged to be suitably strong, for moderate

support weight bearing applications, you may choose to use

the supplied SnapToggle® toggle bolts without reinforcing

structural improvement. See

Figure 4 on Page 3 for more

details.

If you are using fasteners other than the ones supplied, we do

not recommend flat head style screws (i.e. a screw that

requires a countersunk hole). We recommend stainless steel

fasteners / lock washers (to prevent rusting). Also, residue

from steel drill bits and other non-stainless steel tools may

cause rust stains. Properly clean metal chips, debris etc. prior

to exposing to water.

TIPS FOR DRILLING INTO TILE

• Use carbide tipped masonry drill on ceramic, or consider a

diamond tip drill for porcelain tile.

• If possible, drill a smaller pilot hole first.

• Be careful to prevent the drill from moving when you first

start it rotating - use duct tape or a wood guide on the

surface of the tile to hold the drill from walking sideways.

• A variable speed drill on slow is best to start the hole. Do

not apply too much pressure when drilling. Do not use a

hammer drill.

WATERPROOFING

We recommend that sealant be applied around the wall

contact points for any products mounted in the shower. If not

properly sealed, there is the potential for water to seep into the

wall. This may cause the wood to rot, thus compromising the

structure the support rail is attached to.

CORIAN: CLEANING AND MAINTENANCE

The Invisia™ Collection features several tray surfaces made

from Dupont’s Corian® material. It is a very durable,

non-porous material that resists the growth of bacteria. Clean

with general household cleaners. The surfaces & edges can

be sanded and buffed to repair if necessary.

Advertising