Activeforever Invisia Collection Toilet Paper Dispenser with Integrated Support Rail - Manual

Page 1 of 4
www.ActiveForever.com
Invisia ™ Wall Toilet Roll Holder
Installation Instructions:
WTRH-CRP / WTRH-PCW
-Wood studs.
-Adequate wood structural backing.
-No aligning structural wood studs.
-Suitably strong structural wall board.
#10 x 2" S/S
Screw and Lock
Washer
#10 x 2" S/S Bolt
with SnapToggle®
toggle bolts
STRUCTURE BEHIND WALL
(Wall Surface: Tile on 1/2" min cement board)
FASTENER
COMBINATION
THANK YOU...
Thank you for purchasing the Invisia™ Wall Toilet Roll Holder.
We are confident that you will find the unique design and
durable construction of this product to be of great assistance
in your daily routine.
To fully enjoy your Invisia™ Wall Toilet Roll Holder, please
take a few moments to read these instructions. You should
store these instructions in a safe place for future reference.
SAFETY CONSIDERATIONS
CAUTION: It is your responsibility to see that your Invisia™
Wall Toilet Roll Holder is properly assembled, installed, and
cared for. Failure to follow instructions in this manual could
result in serious injury. Support rails can be slippery when wet
- use this product with caution.
INVISIA™ WALL TRH INSTALLATION
The Invisia™ Wall Toilet Roll Holder should only be installed in
areas where the mounting surface is structurally sound.
Strengthening modifications may be required (see page 3 for
details). Should not be installed in fiberglass / acrylic bathroom
enclosures with insufficient stiffness and strength. Should not
be installed into metal studs. If you are not equipped to
undertake the outlined work we recommend that you have your
Invisia™ Wall Toilet Roll Holder installed by a qualified
contractor. Suggested maximum user weight of support rail is
350lbs/159kg, however this rating is conditional upon suitable
fasteners and supporting surface. Tray / paper holder are not a
weight bearing surface.
WARRANTY
All HealthCraft™ Products are covered by a one year limited
warranty with the exception of hand grips which are subject to
normal wear. Buyer hereby indemnifies, agrees to hold
harmless and defend HealthCraft™ Products Inc. from and
against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including
without limitation consequential damages and reasonable
professional fees) resulting from buyers specification,
application, or improper use of goods described hereon;
buyers omission or neglect.
HealthCraft™ Products Inc. does not assume any liability for
damage resulting from services performed by others or faulty
installation, misuse or misapplication of goods sold by
HealthCraft™ Products Inc.
HealthCraft™ Products Inc. shall not be liable for prospective
profits or special, indirect, or consequential damages, or for
the cost of any corrective work done without HealthCraft™
Products Inc. prior approval. HealthCraft™ Products Inc. total
liability hereunder shall in no event exceed the purchase price
of the goods specified hereon.
TOOLS REQUIRED
• Level • Personal Protective Eyewear
• Hammer • Carbide tip drill suitable for tile
• Stud Finder • Protective blanket
• Center Punch
FASTENERS: INSTALLATION & MAINTENANCE
The Invisia™ Wall Toilet Roll Holder must be secured to the
wall with fasteners appropriate to the structural material.
Inspect, or have inspected (and tighten if necessary) the
screws on a monthly basis. Included are 2 sets of mounting
hardware for different wall applications.
For tile walls judged to be suitably strong, for moderate
support weight bearing applications, you may choose to use
the supplied SnapToggle® toggle bolts without reinforcing
structural improvement. If possible, line up the center hole of
the wall plate with a wood stud.
If you are using fasteners other than the ones supplied, we do
not recommend flat head style screws (i.e. a screw that
requires a countersunk hole). We recommend stainless steel
fasteners / lock washers (to prevent rusting). Also, residue
from steel drill bits and other non-stainless steel tools may
cause rust stains. Properly clean metal chips, debris etc. prior
to exposing to water.
TIPS FOR DRILLING INTO TILE
• Use carbide tipped masonry drill on ceramic, or consider a
diamond tip drill for porcelain tile.
• If possible, drill a smaller pilot hole first.
• Be careful to prevent the drill from moving when you first
start it rotating - use duct tape or a wood guide on the
surface of the tile to hold the drill from walking sideways.
• A variable speed drill on slow is best to start the hole. Do
not apply too much pressure when drilling. Do not use a
hammer drill.
WATERPROOFING
We recommend that sealant be applied around the wall
contact points for any products mounted in the shower. If not
properly sealed, there is the potential for water to seep into the
wall. This may cause the wood to rot, thus compromising the
structure the support rail is attached to.
CORIAN: CLEANING AND MAINTENANCE
The Invisia™ Collection features several tray surfaces made
from Dupont’s Corian® material. It is a very durable,
non-porous material that resists the growth of bacteria. Clean
with general household cleaners. The surfaces & edges can
be sanded and buffed to repair if necessary.