Activeforever Invacare Standard Patient Lift Sling User Manual
Page 14
SECTION 4—USING FULL BODY, COMFORT AND HEAVY-DUTY ONE-PIECE STYLE
SLINGS
14
Part No 1023891
Attaching the One-Piece Style Sling to the Patient Lift
NOTE: For this procedure, refer to FIGURE 4.3.
1. Place the straps of the sling over hooks of the swivel bar. Match the corresponding colors
on each side of the sling for an even lift of the patient.
CAUTION
When connecting sling to the patient lift, the shortest of the straps MUST be at the
back of patient for support. Using long section will leave little or no support for patient's
back. The loops of the sling are color coded and can be used to place patient in various
positions. The colors make it easy to connect both sides of the sling equally. Make sure
that there is sufficient head support when lifting a patient.
2. Refer to the Lifting the Patient in the Patient Lift Ownerʹs Manual.
NOTE: Invacare Lift Swivel Bars have three hookup points per side. The middle hookup is ONLY used
for slings that have three sets of straps per side or slings that use chains or adjustable straps.
FIGURE 4.3 Attaching the One-Piece Style Sling to the Patient Lift
Color
Coded
Straps
Patient in Reclined Position
(head and leg strap lengths equal)
Patient in Seated Position
(short strap length both sides of
head, long strap length at legs)