Activeforever Health Craft Assista Rail (Standard) User Manual
Assista-rail, Assista-cane, Installation instructions
INSTALLATION
INSTRUCTIONS
Model AST-C, AST-S,
AST-C-AK &
AST-KIT
Assista-Cane
C
with
CAUTION
RISK OF INJURY!
Understand these instructions prior to using product.
Installation Preparation
A
Install Assista-Cane
TM
(Optional)
Remove bed mattress, pillows, etc. to
expose box spring.
Locate tube furthest from head of bed
adjacent to hip as shown.
HealthCraft Products Inc., 2790 Fenton Rd., Ottawa, Ontario, Canada, K1T 3T7
Copyright 2004. Specifications subject to change without notice.
Install the Assista-Cane
TM
on the bed rail vertical tube furthest from the
headboard (as shown) by tightening the screws through the safety
clamps (C1) to fix rail in an outward position.
Assista-Cane
TM
and safety clamps are to be used exclusively with Assista-Rail
TM
.
Failure to comply with instructions may cause injury.
Assista-Cane
TM
option to be installed in an outward position from the bed (as
shown) or neck entrapment causing injury or death may result.
Ensure that clamping screws are tightened on a regular basis.
Do not use if more than minimal sideward (lateral) support is needed.
Assista-Cane
TM
may move/pivot if subjected to excessive side force. Reposition
cane and re-tighten screws.
Due to the potential risks associated with head / limb entrapment, the Assista-Rail
TM
is not recommended for users with the following conditions: erratic body movements,
altered mental status, pre-existing conditions such as confusion, restlessness and dementia.
VERTICAL LOAD BEARING ONLY - DO NOT use if you require more than minimal sideward (lateral) support.
Maximum user weight 250lbs/113kg.
Do not use on wet or slippery floors.
Do not use with electric or hospital style beds.
Supplied strap must be installed, tightened and regularly inspected for secure operation.
Lock casters on mobile beds prior to using rail.
For more info, visit
www.patientsafetycenter.com
TM
TM
B1
B2
B3
DETAIL B1
Align rail with edge of bed. Align female
side of the buckle close to edge of bed.
Tie a knot around the rail leg (B1). Pull
strap across and tie a knot around the
other rail leg (B2). Pull strap around
metal bed frame as shown (B3).
*L
B
Install Safety Strap (MANDATORY)
B5
B4
*NOTE: Length (L) of strap from knot to edge
of bed depends on size of bed.
Put the mattress back on the box spring
(B4) and pull slack to tighten strap (B5).
C1