Innotech Systems Sunshine - Manual (Page 15)

SUNSHINE USER MANUAL...1
Training the Alarm Clock
If.you.are.having.problems.getting.the.voice.features.to.work.
you.can.train.the.alarm.clock.to.recognize.your.voice...You.
can.also.use.this.feature.to.train.the.Sunshine.Alarm.Clock.to.
recognize.commands.in.different.languages.
Training
1.. .Press.and.hold.the.TRAIN.button.(FIG.22).for.2.seconds.
....The.alarm.clock.will.then..prompt.you.to.say.“Alarm.Clock”...
When.the.green.light.comes.on,.say.“Alarm.Clock”...It.will.
then.ask.you.to.repeat.it..During.the.training.process,.the.
alarm.clock.will.always.ask.you.to.say.each.command.at.
least.twice..This.is.to.filter.any.extraneous.sounds.that.it.
may.hear.during.the.training.process.
....The.alarm.clock.will.continue.to.prompt.you.to.say.each.
voice.command..They.are:
. . •.Alarm.Clock. •.Any.Alarms?
. . •.What.time.is.it?. •.Snooze
. . •.Play.memo. •.Yes
. . •.Night.Light. •.No
....After.you.have.completed.saying.all.of.the.commands,.the.
alarm.clock.will.say.“Voice.Commands.Trained.”..Now.the.
alarm.clock.is.ready.to.be.used.again....Please.test.all.of.the.
voice.commands.to.make.sure.they.work.correctly...Refer.to.
the.Voice.operation.section.of.the.manual..
Note: Once you train the Sunshine Alarm Clock it will be optimized
for you voice, and may not work very well for other people.
FIG 
Helpful hint:
Once you are in training
mode the train button
can be used to skip
recording a particular
voice command. For
example, if you recorded
all the voice commands,
but “play memo’ was
not working correctly,
You can re-train “play
memo” by pressing the
train button 2 times. To
exit the train mode you
must keep pressing the
train button until the
alarm clock responds
with “training complete”.