Activeforever Risedale Lift Chair - Manual (Page 7)

RISEDALE USER GUIDE 7
Operating Instructions
After you set up your Risedale, position it in such a way that
no one will trip over the cord, and plug it in the power outlet.
Now, sit in the Risedale. If your
feet are not comfortably flat on the
floor, you may need to remove the
1.5 inch leg extensions (see
Assembly Instructions page 5).
Next, push and hold the Power
Lever with your thumb to rise from
the seated position.
Hold on to the arms of the chair.
To descend to the seated position,
pull and hold the Power Lever with
your index finger. Again, hold on
to the arms of the Risedale.
Note: To reduce the risk of electric
shock, you will notice that the Risedale
has a polarized plug (one blade is
wider than the other), which will only
fit into the outlet one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. Do
not change the plug in any way.
Note: The Power Lever will work on your right or left hand side.
When reattaching the lever, press it firmly onto the metal finger.
Warning: Do not install both Power Levers at the same time.
Caution: To retrieve an object that has fallen under the
cushion, first raise the seat cushion up, then unplug the
power cord, and reach under the cushion from either side to
retrieve the object.