AcuRite 13021 Alarm Clock - Manual (Page 9)

9
Snooze Function
While alarm is sounding, press the Snooze button, located on the top of the
clock, to activate the 10 minute snooze function. When Snooze has been
activated, the icon on the display will flash.
Backlight
During power adapter use, press the Snooze button for momentary backlight
at 100% brightness (5 seconds) and then revert back to user selected
brightness. During that 5 second period, the display will also show the month
and date for 2 seconds, then return to the current time.
During battery powered use, press the Snooze button for momentary backlight
(10 seconds when on battery power).
The backlight MAY turn off at 2:00AM and 3:00 AM to acquire the atomic
clock (RCC) signal.
The display backlight has 6 brightness levels:100% (default), 70%, 50%, 30%,
10%, 5%, and AUTO DIM. The display backlight brightness can be adjusted
by using the DIMMER CONTROL, located on the back of the clock.
AUTO DIM MODE: Automatically adjusts display brightness based on time of day & year.
MARCH 11- NOVEMBER 4 6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 30% brightness
NOVEMBER 5 - MARCH 10 7:30 a.m. - 7:00 p.m.= 100% brightness
7:01 p.m. - 7:29 a.m. = 30% brightness
USB Charging
Charge your mobile device by plugging your device’s
USB power cord (not included) into the USB charging
port on the back of the clock.
USB charging is only available during power adapter
use; USB charging is not active when operating on
battery power only.
Note: Follow the manufacturer’s instructions for your
mobile device(s) to determine compatibility with the USB
charging feature on this product. Some devices may not
support USB charging or may require a higher power
rating than this product provides. Observe the charging status on your device.
Ensure your device is working properly before attempting to charge.
OFF
ON
PROJECTOR DIMMER
+
-
FLIP
FOCUS
DC 4.5 v CHARGE
USB DEVICE