AcuRite 50314 Clock - Manual

DO NOT HANG IN DIRECT SUNLIGHT!
For the most accurate temperature readings choose a location
that will not be exposed to direct sunlight or other heat
sources.
To Set Time:
Turn the set knob on back of the clock movement in either
direction.
To Start Clock:
Clock requires one "AA" battery (not included).
Insert one "AA" battery (not included) as indicated in the
battery compartment.
Thermometer Calibration:
The pointer may move during shipping, causing the
thermometer to read temperature inaccurately. If the
thermometer is reading incorrectly, compare the temperature
reading to a known accurate thermometer. Let both
thermometers adjust to room temperature for at least three
hours. If the new thermometer continues to read inaccurately,
adjust the pointer by turning knob on the back of the unit in
the approriate direction.
Instruction Manual
Clock/Thermometer
Questions?
Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.