Setting the clock manually, Future forecast icon, Weather trend icon – AcuRite 75329T Clock User Manual

Page 4: Wireless signal reception icons

Advertising
background image

SETTING THE CLOCK MANUALLY

Back of Clock

“Set” to confirm

manual settings

Down

Arrow

SET

Up

Arrow

5

4

The future forecast feature automatically gives you the predicted weather forecast icon
for the next 12 to 24 hours based on an advanced algorithm that analyzes barometric
pressure changes and temperature. This weather forecaster will provide the most
accurate forecast that a single stations instrument can provide.

Future Forecast Icon

a) Press and HOLD the SET button until you see the selection of seven time zones

b) Press the UP (

s

) ARROW repeatedly until you reach your time zone,

then press SET then release.

a) Press the UP (

s

) ARROW to turn DST (Daylight Saving Time) function on or

off. Press “SET” to confirm then release.
b) The HOUR will flash

c) The MINUTE will flash

d) The YEAR will flash

e) The MONTH will flash

f) The

DATE

will flash

e) The °F will flash

Press “SET”

to confirm

Press “SET”

to confirm
Press “SET”

to confirm
Press “SET”

to confirm
Press “SET”

to confirm

Press “SET”

to confirm

Press the UP (

s

) ARROW

repeatedly,

until the correct hour (AM

or PM) is displayed.

Press the UP (s) ARROW repeatedly,

until the correct minute is displayed.
Press the UP (s) ARROW repeatedly,

until the correct year is displayed.
Press the UP (s) ARROW repeatedly,

until the correct month is displayed.

Press the UP (

s

) ARROW

repeatedly,

until the correct date is

displayed.
Press the UP (

s

) ARROW to change

between °F and °C.

Press the UP (

s

) ARROW to or DOWN (

t

) ARROW buttons to turn OFF

Atomic signal

. This will stop the clock from searching for the Atomic radio

signal.

NOTE: You do NOT need to turn off the atomic clock to set the time manually. Once the clock receives the signal, it will adjust the

clock accordingl. However, you may choose to deactivate the atomic clock feature completely if you prefer to manually control

the clock or if you live in a remote area that does not readily receive the atomic signal. As long as the atomic clock is ON, it will

automaticlly adjust itself to the correct time, overriding your manual setting.

1) SETTING YOUR TIME ZONE

3) SETTING THE CLOCK & CALENDAR

2) TURNING ATOMIC CLOCK FEATURE ON/OFF

DAY OF THE WEEK WILL UPDATE AUTOMATICALLY AS YOU SET THE DATE

FUTURE WEATHER FORECAST ICONS WILL AUTOMATICALLY APPEAR ONCE BATTERIES

ARE INSERTED

The “Weather Trend” directional arrow icon will indicate one of three barometric pressure
trend directions. This will give an additional indicatin of future weather conditions

Weather Trend Icon

The main unit has a signal reception icon near the outdoor temperature display area. If
there are a low number of “bars” present, you may experience no temperature display
(“--”) or inaccuracy. In either case, you may need to relocate one of both of the units. If
most or all 4 of the bars are present, wireless reception is good and no action is required.

Wireless Signal Reception Icons

Strong

Reception

NO

Reception

falling: cloudy to stormy conditions likely

rising: clearing conditions likely

steady: current conditions will persist

HEAVY STORM

(severe weather conditions

are forecasted when flashing)

STORMY

MOSTLY

CLOUDY

PARTLY

CLOUDY

MOSTLY

SUNNY

rain or snow

rain or snow

Advertising