AcuRite 00562 Clock - Manual (Page 2)


ALARM
Press the ALARM button to read alarm time for 5 seconds.
Press and hold the ALARM button for 2 seconds to enter the alarm set mode. Press + or – to
adjust, then press ALARM to confirm and move to next feature.

ZONE / DST ON / OFF
Press to select the current time zone: PST, MST, CST or EST.
Hold the ZONE button for 2 seconds to switch from DST ON to DST OFF.
*If your location observes Daylight Saving Time, this setting must always be turned ON so the
clock can adjust properly for the time changes. If your location never observes DST, this setting
should always be turned OFF.

(+) SYNC
During CLK / CAL or ALARM settings, press the + button to advance; hold the button for a 10
step fast advance. During normal operation, press the + button to get a manual synchronization
of the atomic time signal.

(-) ALARM ON / OFF
During CLK / CAL or ALARM settings, press the – button for 1 step backward; hold for 10 step
fast set. During normal operation, press the ALARM ON / SNOOZE ALARM / ALARM OFF. The
snooze function will only work when the Zz icon is showing in the upper left corner of the clock
display. A bell icon appears when the alarm is set.

SNOOZE, SNOOZE / LIGHT
Press the SNOOZE bar on the top of the clock to enable a repetitive 8 minute snooze alarm
when alarm is beeping.
Desk or Table Top Use
On the back of the clock case, there are two folding legs. Rotate these legs out and the clock will stand
up for desk or table top use.
Features & Specifications

WWVB Radio-Controlled clock with PST / MST / CST / EST time zones

Snooze daily alarm

Perpetual calendar with month, date and day of week

DST and ST selectable

12 / 24 hr clock

Calendar: 1 Jan 2000 to 2050

Snooze time: 8 minutes

Temperature range: 32⁰F to 158⁰F

Temperature resolution: ± 0.1 degree

Temperature accuracy: ± 2 degrees