Chapter 3-4 network, Chapter 3-4-1 general settings – Acumen AiP-T53N User Manual
Page 19
18
Update hyper link. Locate “flasham.bin” in your computer by clicking the Browse
button. Click Submit button to finish firmware upgrade. To ensure the quality
of transmission, please make sure that there is no user accessing H.264 FULL
HD AiP camera during firmware upgrade.
Chapter 3-4 Network
H.264 FULL HD AiP camera provides Internet protocols including IP, DHCP, and
DDNS. A user can configure these Internet protocol settings. To setup above,
please read the following sections:
Chapter 3-4-1 General Settings
Network general settings are the basic settings connecting H.264 FULL HD AiP
camera to the network. The default IP Address of H.264 FULL HD AiP camera
is 192.168.0.200. A user can use this IP address to verify the network
connection between a local PC and H.264 FULL HD AiP camera using Internet
Browser.
For local area network configuration, please enter, at least, IP address, Subnet
Mask, and Gateway IP. Click Submit button to update these settings.