Acura Embedded AcuTab-A - Manual (Page 4)

d. The left side of the AcuTab-A
1.Power Button
2. Lock Button
3. Wi-Fi Button
4. DC-Jack
4. Plugging to the DC supply
The AC adapter provides external power source to your system and charges the
internal battery pack at the same time. The AC adapter also has an auto-switching
design that can connect to any 100VAC ~ 240VAC power outlets. To connect the
power adapter:
5. Starting System
The Power/Resume button is found on the left side of the AcuTab-A. Press the
Power/Resume button to start your system and check that if the Power LED turns on.
After a few seconds, the system
’s display will turn on and your system will begin to
execute the Power On Self Test or POST to check if all system components are
running properly. After the test completed, AcuTab-A will boot up the Android OS from
hard drive.
6. HotKey of AcuTab-A
AcuTab-A comes with an Android OS pre-installed and no need to be setup during
initial use. The system home screen encoded with <Program Hotkey Utility> that
provides you plenty of applications of Android.
There are five HotKey buttons in the front side of AcuTab-A. Click on hotkey utility by
finger to appear the applications embedded for system programming.
1. Plug the AC adapter
connector to the DC-Jack
socket on the left side of
the system.
2. Plug the power cord to the
AC adapter.
3. Plug the other end of the
power cord to a live wall
outlet, at the same time,
the Power LED at face
panel lights up green.
5
6