Acura Embedded PowerBrick-CV 3.1 - Manual (Page 6)

PowerBrick-CV User’s Manual
3.6 Specifications for PowerBrick-CV
Table 3.2: System Features
Processor Intel® Core™ Duo supports Hyper Threading
Technology; VRM 10.0 standard
Chipset Intel 945GM
System FSB 533/667MHz Front Side Bus
Memory Dual channel DDR2 SDRAM at 400/533/667MHz
Video Intel Graphics Media Accelerator 950 integrated
400MHz RAMDAC graphics 256MB
Audio Audio jacks
Hard Disk Two SATA ports (1.5Gbs/s) for hard disks
DVR Module 4-port 120 FPS camera input
640 x 480, 640 x 240, 320 x 240 image resolution
Standard Motion - JPEG compression
Multi-screen monitoring
LAN 10/100/1000 Mb Fast Ethernet
USB 2.0 Integrated 4 independent OHCI controller supporting
USB 1.1 ports; Integrated 1 EHCI controller
supporting USB 2.0 ports; Dynamic connection
support to USB 2.0 or USB 1.1 devices
Hardware
Monitor
System, processor temperature, voltage and fan
speed monitor. Auto Thermal fan speed control
Power
Management
ACPI 3.0 supporting states S0, S3, S4, S5, and C0,
C1, C2, C3, C4
Dimensions
7.60“ x 4.35“x 8.15“
Power 10 – 30 Volt
Table 3.3: Input/Output
15 Pin VGA 1
TV out 1
S/PDIF OUT 1
PS/2 / Keyboard 1
PS/2 Mouse 1
Audio jacks 1
USB 2.0 4
RJ45 Fast Ethernet 2
RS232 COM port 2 Option 3
12 V DC Power Jack 1
Page 7
3.7 Operation and maintenance
This module requires no routine maintenance. The green LED indicator
when lit indicates proper operation and health.
The power supply must be protected by a 15A auto fuse on the input line
from the vehicle battery.
3.8 Warning
Before power up the computer, make sure all cables connected to the
computer and the monitor.
WARNING:
Fist hookup all cables then turn on computer power
swich.Make sure monitor power led on or blinking.
TO COMPUTER TO MONITOR
page 8