Acura Embedded AcuBrite 19″-Nav - Manual (Page 26)

AcuBrite 19-Nav Manual
5.0 OSD OPERATIONS
Introduction
Your Acubrite 19-Nav Sunlight Viewable display can be controlled using the On Screen Display (OSD) menu
and/or the 8 buttons on the front bezel of the unit.
The OSD menu enables you to change the way in which your display is set up and is accessed using the Menu
button.
Using the buttons
Each of the 8 buttons on the front bezel of your display has an input and a control function.
Input functions enable you to select the type of signal input to the display.
Control functions enable you to change the appearance of the display.
Power
Power ON Key
To power your monitor ON, just need to press this button and it will delay the power on sequence around 3
seconds. This is Acubrite 19-Nav’s brand new design to well protect your Acubrite 19-Nav Sunlight Viewable
display damaged in the surge voltage from the engine.
Power OFF Key
To power your monitor OFF, just need to press this button and it will also delay the power off sequence around 3
seconds.
Pressing the power button will display a list of what input for the main screen is associated wit h each button.
This is jus t a reminder and is not part of the input selection process.
BRIGHTNESS Key
When you press the BRIGHTNESS Key, the screen will show the following image
You can press the UP /DOWN Key to do the screen brightness adjustment. When the brightness achieve 50 and
keeping pressing “UP” Key, the dimming will keep the brightness at 50. When you dimming down to brightness 1
and keeping pressing the “DOWN” Key, the dimming will keep the brightness at 1.
Page 25