Acura Embedded AcuPanel 19 - Manual (Page 79)

Chapter 4: BIOS Setup
Boot
This section is used to configure the boot features.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
CSM16 Module Version
GateA20 Active
Option ROM Messages
Interrupt 19 Capture
Boot Option Priorities
Boot Option #1
Hard Drive BBS Priorities
1
[On]
[Disabled]
07.65
[Upon Request]
[Force BIOS]
[Disabled]
Save & Exit
Number of seconds to wait
for setup activation key.
65535(0xFFFF) means indefinite
waiting.
Quiet Boot
Enabled
Disabled
GateA20 Active
Upon Request
Always
Displays OEM logo instead of the POST messages.
Displays normal POST messages.
GA20 can be disabled using BIOS services.
Do not allow disabling GA20; this option is useful when
any RT code is executed above 1MB.
[SATA SM: 4GB SATA...] : Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Option ROM Messages
This field is used to set display mode for Option ROM.
Interrupt 19 Capture
Allows Option ROMs to trap Interrupt 19 when enabled.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Setup Prompt Timeout
This section configures the number of seconds to wait for the setup
activation key.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the numeric
keypad is the number keys. When set to Off, the function of the numeric
keypad is the arrow keys.
74