Acura Embedded AcuPanel 17 - Manual (Page 64)

Chapter 3: System Setup
6. With the bracket still facing backwards, align the mounting holes on
the bracket to the mounting holes on the back of the chassis, then
tighten screws to secure it. Once secured, plug the power adapter cable
into the DC input.
DC input
59
Plugging the DC Power Cable
1. Plug the DC 4-pin DIN power jack (male) into the DC 4-pin DIN power
jack (female) that is on the system.
2. The table below shows the pin definition of the cable.
Color
Black
Red&Yellow
Blue&Black
Pin Definition
GND
DC+
DC-