Windows xp embedded, Linux embedded, Application software – Acura Embedded PowerBrick 3.1 User Manual

Page 6: Specifications for power brick

Advertising
background image

PowerBrick ™ Quick Reference Manual

3.4 Windows XP Embedded

If you want to reinstall Windows XP Embedded, boot the computer, place

the CD-ROM labeled “Windows XP Embedded Recovery” into the external

CD-ROM drive, presses RESET and follow the instructions on the screen.

We recommend that this be done by experienced computer users only.

3.5 Linux Embedded

If you want to install Linux, boot the computer, place the CD-ROM labeled

“Acura Embedded Linux” into the external CD-ROM drive, press RESET

and follow the instructions on the screen. Note: this should only be done by

an advanced user who has experience with Linux.

3.6 Application Software

You should be able to run all normal/generic application software such as

Microsoft Word, Excel, PowerPoint, Adobe software etc. if you have

Windows installed. See the relevant manual/help guides for the specific

software. For Linux you will have to specifically select software designed

for Linux. Acura is not responsible for failure of any software on your

computer but if you have any particular software needs, please call Acura

Technical Support or email

[email protected]

.

3.7. Specifications for Power Brick

Table 3.2: Input/Output

15 Pin VGA

1

PS/2 Keyboard & Mouse

1

RS232 Serial Port

4

USB 2.0

4

RJ45 Gigabit Ethernet Port

2

Compact Flash II

1

Audio Jacks

1

Ignition controller (optional)

1

GPS/WiFi/CDMA antenna (optional)

2

8 ~ 30V DC Power Jack

1

Page 7

Table 3.3: System Features

Processor

Intel® Core™ Duo processor (2.0 GHz)

System FSB

667 MHz

Memory

533MHz/667MHz DDR2 SO-DIMM up to 2GB

Video

Integrated Intel® Extreme 945GM Graphic, support

64MB DVMT

Audio

Audio Jacks

Hard Disk

Standard 2.5” SATA hard disk, 160GB

CD-ROM

None

LAN

Two Broadcom PCIe GbE controllers

USB 2.0

Integrated 4 independent OHCI controller supporting

USB 1.1 ports; Integrated 1 EHCI controller

supporting USB 2.0 ports; Dynamic connection

support to USB 2.0 or USB 1.1 devices

Hardware Monitor

System temperature, voltage and fan speed monitor.

Auto Thermal fan speed control

Power

Management

ACPI 1.0b compliance and OS direct power

management, Wake-on event: RTC/USB

Keyboard/Modem/LAN/Keyboard/Mouse

Dimensions

7.60“X 5“ x4.13“ (W x L x H)

Power

8 ~ 30V DC


3.8 Operation and maintenance
This module requires no routine maintenance. The green LED indicator

when lit indicates proper operation and health.
The power supply must be protected by a 7A auto fuse on the input line

from the vehicle battery.






Page 8

Advertising