Acura Embedded PowerBrick ATOM - Manual (Page 2)

PowerBrick - ATOM™ Quick Reference Manual
Copyright by Acura Embedded Systems Inc. Updated by August 09/13
• 1x mini-PCIe with two antenna holes (Optional)
• Audio jack Line-out and Mic in
• Power Switch Press to power-on or power-off the system.
• Power Status LED Indicates the system’s power status.
• HDD Activity LED Indicates the hard drive’s activity.
Figure 1.2 : Back side of PowerBrick ATOM™
• 1x DVI-I & 1x HDMI display output
• Dual Intel® 82574L GbE LAN ports
• 1x external CFast socket Used to insert a Compact Flash card
(optional)
• Support 9-36V DC input Used to plug a DC power cord
• Supports ATX power mode, WoL, LAN teaming and PXE function
• 185mm(W) x 131mm(D) x 54mm(H) (7.28”x 5.2”x 2.13”)
2. Installation
2.1 Contents of the Computer Box
Figure 2.1 Box major components
Page 2
In the box you will find the following items:
PowerBrick-ATOM™-ATOM computer, power plug, mounting plate, manual and
drivers CD.
If you have purchased Windows operating system with your computer, these
CD’s should be included. Keep them in a safe place.
Do not turn power on until you have read the next section and all
cables are connected.
Optional device cables or units that you provide yourself could include
the following:
•
USB cable
• Speaker and microphone cables
• RJ45 Ethernet TP cable
•
RS232 Serial port cable
2.2 Mounting in your vehicle or final location
This chapter provides you with the information of fixed system mounting. Prior to
that, please prepare the installation tools and appropriate items. If you are not
clear about the items, contact your dealer for information.
2.3 Mounting tools
For mounting your computer in a vehicle you need the following tools:
• Wrenches (as required)
• Star (Philips #2) Screw driver
•
Drill (3mm or 1/8”) Check behind surface before drilling!
• Bolts and nuts appropriate to mount the plate in your vehicle
•
2.4 Computer installation
Mounting screws or bolts and nuts for mounting to your specific vehicle are not
provided, as there are many variations of thickness that the unit might be
mounted to. If mounting in a vehicle that is subject to vibration and shock, It Is
important to use the mounting plate with attached shock absorbers where
vibration could occur. The mounting plate should be fastened tightly with bolts
and nuts. Please ensure that if you mount any bolts/nuts under the computer,
that they do not touch the computer itself. Otherwise, the shock absorbers will
not protect the computer properly.
Page 3