Acura Embedded AcuTab-A - Manual (Page 36)

also has an auto-switching design that can connect to any 100VAC ~
240VAC power outlets.
To connect the power adapter:
1. Plug the AC adapter connector to the DC-Jack socket on the left
side of the system.
2. Plug the power cord to the AC adapter.
3. Plug the other end of the power cord to a live wall outlet, at the
same time, the Power LED at face panel lights up green.
--
--
For the power supply of this equipment, an approved power cord has
to be used.
Make sure the socket and any extension cord(s) you use can support
35