Fog light bulbs – Acura 2012 TSX Sport Wagon User Manual

Page 250

Advertising
background image

uu

Replacing Light Bulbs

u

Fog Light Bulbs

248

Main

tenan

ce

3. Remove the coupler.

u

It can be removed by pushing the tab.

4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the headlight

assembly and turn it to the right.

6. Insert the coupler into the connector of the

bulb.

High voltage can remain in the circuit for a long period of time after the light is
switched off. Do not attempt to inspect or replace the high voltage discharge type
bulbs yourself. Ask a dealer to inspect and replace low beam headlights.

Fog Light Bulbs

When replacing, use the following bulbs.

1. Remove the clip using a flat-tip screwdriver,

and lower the under cover.

Bulb

Coupler

Tab

Driver and passenger side

Low Beam Headlights

Fog Light: 55 W

1

Fog Light Bulbs

NOTICE

Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.

The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.

Clip

Under Cover

2012 TSX5D-31TL7610.book 248 ページ 2011年7月11日 月曜日 午前8時10分

Advertising
This manual is related to the following products: