Acura 2013 TSX User Manual
Page 259
Advertising
258
uu
Checking and Maintaining Wiper Blades
u
Changing the Wiper Blade Rubber
Main
tenan
ce
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
5. Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.
u
Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
u
The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
Blade
Top
Retainer
Blade
Tab
Indent
13 ACURA TSX 4D-31TL16400.book 258 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Index
TOC
2013 TSX
Advertising
This manual is related to the following products: