Acura 2012 RL - Manual (Page 520)

Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
, , and , or the diagram
on the fuse box lid, which fuse or
fuses control that device. Check
those fuses first, but check all the
fuses before deciding that a blown
fuse is the cause. Replace any blown
fuses, and check if the device works.
Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head
screwdriver.
Remove the cover from the fuse
box.
3. 1.
2.
518 519 520
Checking and Replacing Fuses
Fuses
514
FUSE
BLOWN BLOWN
11/07/20 19:07:42 31SJA670_519