Changing a flat tire – Acura 2011 RL User Manual

Page 503

Advertising
background image

Take the tool case out of the spare
tire.

Open the trunk, and fold the trunk
floor forward.

Unscrew the wing bolt, and
remove the spacer cone. Then
take the spare tire out of its well.

Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
If you are towing a trailer, unhitch
it.

Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.

If you have a flat tire while driving,
pull over safely. Drive slowly along
the shoulder until you get to an area
far away from traffic lanes.

1.

2.

3.

4.

5.

CONTINUED

Changing a Flat Tire

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

497

TRUNK FLOOR

TOOL CASE

JACK

SPARE TIRE

The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.

Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.

10/08/04 20:08:47 31SJA660_502

Advertising
This manual is related to the following products: