Abs (anti-lock brake system) – Acura 2011 TSX User Manual

Page 214

Advertising
background image

Braking ABS (Anti-lock Brake System)

212

D

riv

in

g

ABS (Anti-lock Brake System)

ABS

Helps prevent the wheels from locking up, and helps you retain steering control by
pumping the brakes rapidly, much faster than you.

The electronic brake distribution (EBD) system, which is part of the ABS, also
balances the front-to-rear braking distribution according to vehicle loading.

You should never pump the brake pedal. Let the ABS work for you by always
keeping firm, steady pressure on the brake pedal. This is sometimes referred to as
"stomp and steer."

ABS (Anti-lock Brake System)

NOTICE

The ABS may not function correctly if you use an
incorrect tire type and size.

When the ABS indicator comes on while driving,
there may be a problem with the system.
While normal braking is not affected, there is a
possibility of the ABS not operating. Have the
vehicle checked by a dealer immediately.

The ABS does not reduce the time or distance it
takes to stop the vehicle. It only helps with steering
control during hard braking.

In the following cases, your vehicle may need more
stopping distance than a vehicle without ABS:

When driving on rough road surfaces, including

when driving on uneven surfaces, such as gravel
or snow.
When tire chains are installed.

You may hear a motor sound coming from the
engine compartment while system checks are being
performed immediately after starting the engine or
while driving. This is normal.

ABS operation

The brake pedal may pulsate slightly when the ABS is working. Keep holding the
pedal firmly down. On dry pavement, you will need to press on the brake pedal
very hard before the ABS activates. However, you may feel the ABS activate
immediately if you are trying to stop on snow or ice.

When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.

31TL1620.indb 212

2010/09/10 16:13:35

Advertising
This manual is related to the following products: