System setup, Multi-view rear camera – Acura 2012 MDX Navigation User Manual

Page 126

Advertising
background image

Navigation System 125

ACURA MDX KA 31STX850

System Setup

Multi-view Rear Camera

Your vehicle is equipped with a Multi-
view rear camera as shown in the
illustration.

When you shift to R (Reverse) with the
ignition switch in the ON (II) position,
the rear view is shown on the navigation
screen. Parking guide lines appear in the
rear view. For the best image, always
keep the camera lens clean, and be sure
it is not covered.

Since the camera display area is limited,
you should always back up slowly and
carefully, and look behind you for
obstacles.

Visible Range of the Rearview
Image
The rearview image is displayed within
approximately three meters of the vehicle.

NOTE:
• The Multi-view rear camera has a

special lens that makes distances
appear different than they actually
are.

• The Multi-view rear camera display

has a limited range, and the size and
position of objects around the area
may appear different from reality.
Make sure to check the surrounding
area carefully.

Tip:
To turn the guide lines on or off, press
and hold the
CANCEL button for three
seconds.

Multi-view
Rear Camera

Screen display

Actual space

Bumper

Guide lines

Approx. 3 m (9.8 ft)

Approx. 2 m (6.6 ft)

Approx. 1 m (3.3 ft)

Tailgate open
range

Approx. 1 m (3.3 ft)

Approx. 2 m (6.6 ft)

Approx. 3 m (9.8 ft)

Camera

00 ACURA MDX_KA.book 125 ページ 2011年7月27日 水曜日 午前11時6分

Advertising
This manual is related to the following products: