ACU-RITE DRO 200M - Manual (Page 20)

DRO 200M Readout Operations
13
Near Zero Warning
When you are moving to zero, the readout can “warn” you when you are getting
close. This allows you to machine faster and avoid overshooting your desired
location.
You can set the near zero range in Setup.
Centerlines
You will normally use the centerline function when you are doing a preset, to put
an incremental zero at a centerline, or when you want to set the absolute zero at a
centerline. Refer to page 12 for presetting to a centerline, and page 9 for setting
absolute zero on a centerline.
At any other time, using the centerline function will divide the current position in
half and display the result in the incremental display.
Near zero range.
The digits displayed to
the left of the decimal
point will flash.
X C
Divides the X axis
display in half.