ACU-RITE DRO 200E - Manual (Page 19)

READOUT OPERATIONS
DRO 200E
15
R FAULT
To establish an R FAULT point:
1. Press the
e
key then the X key three times. The display will read
“R FAULT”.
2. Press the Y key to toggle
between the R FAULT function “OFF” or to begin entering a distance.
3. Enter the retract fault distance as a real number (positive value). For example,
type in 2
,
.
,
5 then press the E key.
4. Pressing E key will save the information entered and return to the
EDM/DRO view.
R FAULT, or Retract Fault, stops a cut in the event that the ram drifts above a
pre-set range from the lowest progress depth. When the R FAULT distance is
reached the retract relay is actuated for 1/10th of a second to halt the cutting cycle.