ACU-RITE Micro-Line M - Manual (Page 39)

36 MICRO-LINE Reference Manual
REFERENCE
±
Changes the sign of the entered value from posi-
tive(+) to negative(-) or vise versa. Numbers are
positive unless a (-) appears in front of them.
BOLT DEF
BOLT USE
CLEAR
Used to create a bolthole pattern.
Used to run a bolthole pattern.
Acts as backspace key during numeric entry;
otherwise, it clears or cancels the last operation.
ENTER Completes numeric operations; selects next
parameter in
SETUP or BOLT DEF operations.
. Decimal point can be used during numeric entry;
also used to access the recall feature for systems
with 5µm (0.0002”) scales after power up.
0-9
Used to enter a distance, angle, or other number
value.
MLMmanual.QXD 2/12/02 5:01 PM Page 29