Binatone BS-8022 - Manual (Page 6)

6
Note: if you stand on the platform (1) before «0.0»
appeared on LCD (2), the scales will show no
reading. In this case, stand back from the scales and
repeat Step 2.
3. Evenly distributing your weight over the platform (1), stand onto
the scales and don’t move. Wait a few seconds until the appli-
ance calculates the result, which will appear on the display.
4. When measurements are completed, get off the tray.
Note: if after adjustment to zero on the display of the
scales (2) you did not put any load on the tray (1),
the scales will turn off automatically within
approximately six seconds.
5. If the measured weight exceeds the allowable load (150 kg), the
display will show the indication of excess load «Err».
6. If «LO» appears on the scales display (2), this means the batter-
ies require replacement. Open the cover of the compartment (3)
and carefully take them out. Put the new batteries in the appli-
ance, observing polarity.
CARE AND CLEANING
1. Wipe the appliance with a damp lint free cloth,
wiping it dry, so that there are no water marks
on the tray (1). Do prevent water getting in-
side the appliance. Do not use hard abrasive
materials and substances for cleaning.
2. Always keep the appliance in a horizontal
position in a dry, cool place. Do not store the
appliance in places with high humidity or temperature.
DISPOSAL
This appliance should be disposed of in accor-
dance with waste disposal regulations in your coun-
try and with the least damage to the environment.
Only ecologically safe materials are used in the
packaging of our products and the cardboard and
paper can be disposed of with normal paper waste.