Binatone MRHB-8805 - Manual (Page 6)

6
BEFORE USE
Remove all packaging materials from the
appliance and wash the attachment (4), wipe
the blender body (1) and the power supply
cord with damp cloth and then wipe them dry.
OPERATING INSTRUCTIONS
1. Insert the attachment (4) into the correspond-
ing jack in the blender body (1). Turn the at-
tachment (4) clockwise until it clicks.
2. Make sure that the attachment (4) has been
properly installed before turning the appliance
on!
3. Plug the appliance to an outlet.
4. Immerse the bottom part of the attachment (4) directly in the
bowl where the ingredients to be blended are contained.
Note: to prevent splashing, the blades must be completely
immersed in the ingredients to be blended.
5. Press the low rotation speed controller button (2) or the high
rotation speed controller button (3) to start operation of the
appliance. Hold the button during the blending process.
6. Unplug the appliance from the outlet after use.
7. The appliance can be used for any bowls or containers.
CARE AND CLEANING
1. Always unplug the appliance from the outlet
before cleaning.
2. Disconnect the attachment (4) from the
blender body (1) by turning it anticlockwise.
Wash the attachment (4) with warm water and
dry thoroughly.
3. Wipe the blender body (1) and the power
supply cord (5) with damp cloth and then wipe them dry.
4. Do not use abrasive cleansers when washing the parts of the
appliance.
5. Dry the appliance thoroughly before using.
Note: never immerse the blender body (1) and the power
supply cord (5) in water.