Binatone CD-6800 - Manual (Page 5)

5
ENGLISH
children are near the appliance.
X Place the appliance on a flat, dry, horizontal
surface. Appliances with wall mount option
must be installed on a flat, dry, vertical sur-
face.
Warning: always make sure, that there is
enough space between the appliance and
another objects (pieces of furniture, walls
etc.) to ensure an uninterrupted air flow.
X Plug the appliance only into the electric power socket that is
earthed. If the socket you are using is not earthed, please
apply for help to a qualified technician. Do not remodel the
plug and do not use plug/socket adapters.
Warning: if the appliance is plugged into the electric power
socket without grounding, this may cause electric
shocks.
X Do not use the appliance outdoors.
X Do not place the running appliance on uneven surfaces, for
example, on bed etc.
X Do not position the appliance directly under electric power
sockets.
X Violation of safety measures voids warranty rights.
DESCRIPTION OF THE
APPLIANCE COMPONENTS
1. Body
2. Operation mode switch with indicator light (Fig. A)
«O» – «Off»
«I» – «On»
3. Mounting hardware, wall locks and feet (for
CD-6800, CD-6810 models)
BEFORE USE
1. Place the dryer on a flat, dry, horizontal sur
face.
2. Make sure that there is enough space for air
flow around the appliance.
3. Check that the operation mode switch (2) is
set to «O» («Off»).
Wall mounting (for CD-6800, CD-6810)
Place the wall locks on a flat, dry, vertical surface. Attach them
to the wall with the screws supplied as accessory in mounting
hardware, observing the distance indicated on figures B(CD-
6800), C(CD-6810).
Then hang the dryer on the wall locks.