Binatone MEJ-1780 - Manual (Page 6)

6
Do not take the electric cord out of the socket during operation
of the appliance. You should first turn it off.
After using the appliance let it cool for a few minutes. After
that you can boil water in it again.
DESCRIPTION OF PARTS
OF THE APPLIANCE
Picture A:
1. Metal body
2. Flap lid with catch
3. Button to open the lid
4. Detachable filter
5. Water level scale
6. On/off button
7. Indicator light
8. Base with electric cord storage (Picture B)
a. Electric cord
b. Plug
BEFORE USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm
soapy water, rinse carefully and wipe dry. In
case of unusual odor fill the kettle up to a maxi-
mum level with vinegar solution (1 element of
9% vinegar per 20 elements of water), let the
kettle soak for an hour. Then wash out the kettle with tap water,
boil water in the kettle and pour it out.
DIRECTIONS FOR USE
1. Put the kettle with its base on a dry horizon-
tal surface.
2. Take the kettle off the base (8) and open the
lid (2), by pressing the button (3).
3. Fill the kettle with water. Make sure that water
level does not exceed the maximum mark on
the water level scale (5). Do not turn on an
empty kettle. Please, remember that the minimum water level
should be higher than the minimum allowed level.
4. Close the lid (2) and put the kettle back on the base (8).
5. Put the plug in the socket making sure that the mains supply
matches the voltage requirements indicated on the appliance.
6. Turn the kettle on with the on/off button (6). The indicator
light (7) will come on, indicating that water boiling is in process.
7. The appliance will automatically turn off as soon as the water
boils. You can turn the kettle off manually before the comple-
tion of water boiling with the on/off button (6).
8. While pouring water out of the kettle tilt it slightly and gradu-
ally. Remember that there is hot water inside the kettle.