Binatone GK-1700 - Manual (Page 6)

6
Do not take the electric cord out of the socket during operation
of the appliance. You should first turn it off.
After using the appliance let it cool for a few minutes. After
that you can boil water in it again.
DESCRIPTION OF
COMPONENTS
Picture A:
1. Housing
2. Removable lid
3. Removable filter
4. Water viewing window
5. On-off switch
6. Inner power indicator
7. Cord storage base (see picture B)
a. Cord
b. Plug
BEFORE USE
Remove all packing materials from appli-
ance; make sure that there are no foreign items
in it.
Wash internal surface of kettle with warm
soapy water, rinse carefully and wipe dry. In
case of unusual odor fill the kettle up to a maxi-
mum level with vinegar solution (1 element of
9% vinegar per 20 elements of water), let the kettle soak for an
hour. Then wash out the kettle with tap water, boil water in the
kettle and pour it out.
INSTRUCTIONS FOR USE
1. Place the kettle with power base on dry hori-
zontal surface.
2. Lift the kettle off the base (7), open the lid
(2) and fill the kettle with water.
3. Make sure the water level stays between
the minimum and the maximum marks on the
water viewing window (4). Do not switch on
an empty kettle.
4. Close the lid (2) and replace the kettle on the base (7).
5. Plug to AC outlet with the voltage corresponding to the infor-
mation on the product label.
6. Switch the kettle on with the on/off switch (5). The inner
power indicator (6) will go on showing that the water is being
boiled.
7. When the water has boiled the appliance will switch off auto-
matically. You may also manually switch the kettle off before
the boiling process is complete using the on/off switch (5).