Olympus FL-14 - Manual (Page 5)

EN 7
Names of parts Names of parts (Fig. (Fig. p. 3) p. 3)
1 Light-emitting area
2 Auto light receptor
3 Lock ring
4 Lock pin
5 TEST button/CHARGE lamp
6 AUTO CHECK lamp
7 MODE button
8 ON/OFF button
9 Flash control mode lamp
(TTL-AUTO, AUTO, MANUAL)
Preparing a battery Preparing a battery (sold separately) (sold separately)
Use batteries with a choice of followings.
AAA (R03) alkaline batteries (× 2)
AAA (R03) NiMH batteries (× 2)
x
Notes
AAA (R03) manganese batteries cannot be
used.
Continuous fi ring Continuous fi ring
The fl ash may become hot when fi red many
times in succession, resulting in damage
or malfunction. The fl ash should be fi red
no more than 10 times in succession
at intervals of at 6 seconds, after which
it should be left unused for at least 10
minutes.
•
•
Thank you for purchasing this Olympus product. To ensure your safety, please read this
instruction manual before use, and keep it handy for future reference.