Flash modes self-timer, Power save feature – Olympus FE-240 User Manual

Page 13

Advertising
background image

13

En

1

Press the Y

# button repeatedly to select the flash mode and press

.

2

Press the shutter button halfway.

When the flash is set to fire, the

# mark lights.

3

Press the shutter button completely to take the picture.

1

Press the N

Y button to select [Y] and press

.

2

Press the shutter button fully to take the picture.

The self-timer lamp lights for approximately 10 seconds after
the shutter button is pressed, then starts blinking. After blinking
for approximately 2 seconds, the picture is taken.

To save the battery power, the camera automatically enters sleep mode and
stops operating if not used for approximately 3 minutes. Operate the shutter
button or zoom lever to reactivate the camera.

If the camera is not operated for approximately 12 minutes after the camera
enters sleep mode, it automatically retracts the lens and turns off. To resume
operation, turn on the power again.

Icon

Flash Mode

Description

No

indication

Auto flash

The flash fires automatically in low light or backlight
conditions.

!

Red-eye
reduction flash

The red-eye reduction flash mode significantly reduces
this phenomenon by emitting pre-flashes before firing
the regular flash.

#

Fill-in flash

The flash fires regardless of the available light.

$

Flash off

The flash does not fire even in low light conditions.

Flash Modes

Self-Timer

Self-timer Lamp

Power Save Feature

d4336_33_e_basic_00_bookfile.book Page 13 Sunday, November 12, 2006 4:05 AM

Advertising
This manual is related to the following products: