Reference – Garmin GPS II Plus User Manual

Page 31

Advertising
background image

Note: Using the screen back-
lighting can greatly reduce
battery life. If you’re using
your GPS primarily in day-
light hours, you should keep
the backlight timeout at the
default 15-second setting.

25

Reference

Screen Backlighting

The GPS II

+

’s backlight feature illuminates the screen display for a user-defined

interval (the default is 15 seconds) after every keystroke. There are three stages of
backlighting. When backlighting is on, a bulb icon will appear at the bottom left of the
sky view (Fig. 25). To adjust the duration of the screen backlighting, refer to the opera-
tion setup section (see p. 75).

To turn the screen backlighting on:

1. Cycle through the three levels of backlight by pressing the red power key.

To turn the screen backlighting off:

1. Press the red power key.

Whenever the GPS II

+

’s backlighting is off, the bulb icon disappears from the

Satellite Page.

Fig. 25

gps ii + 8/4/98 3:28 PM Page 25

Advertising