Garmin GPS 152 - Manual (Page 49)

39
Reference
Going to a Destination
Going to a Destination
Using the NAV/MOB key, the GPS 152 provides four ways to navigate to a destination: Go To
Waypoint, Follow Route, Follow Track (TracBack), and MOB (Man OverBoard) navigation. Once you
are actively navigating, you will see a straight line that always runs from your current location to the
destination. The easiest method is the ‘Go To’ function, which lets you select a destination waypoint and
quickly sets a direct course from your present position. If you have a waypoint highlighted in a list or
on the map, ‘Go To <waypoint name>’ will appear in addition to ‘Go To Waypoint’. The ‘Go To’ function
can be accessed from a list of waypoints or graphically from the map display.
To activate a ‘Go To’ from the waypoint list:
1. Press the NAV/MOB key.
2. Use the ARROW KEYPAD to highlight ‘Go To Waypoint’ and press ENTER/MARK.
3. To select a waypoint from the waypoint lists, use the ARROW KEYPAD to highlight either the ‘By
Name’ or ‘Nearest’ tab, select a waypoint and press ENTER/MARK. With ‘Go To’ highlighted on the
Waypoint Review page, press ENTER/MARK to confi rm.
To select a waypoint from the map, press MENU. With ‘Select From Map’ highlighted, press
ENTER/MARK. Use the zoom IN and OUT buttons and the ARROW KEYPAD to select a
waypoint, then press ENTER/MARK.
To stop navigation:
1. Press the NAV/MOB key.
2. Use the ARROW KEYPAD to highlight ‘Stop Navigation’ and press ENTER/MARK.
Choose a waypoint from the ‘By Name’ or ‘Nearest’ tab lists.
Highlight ‘Stop Navigation’ and press
ENTER/MARK to stop navigating.
152 Manual Part 2.indd 39 11/27/2002, 2:56:29 PM