Garmin GNC 250 - Manual (Page 50)

The airport runway page displays runway designations, length, surface and
lighting for the selected airport, as well as ILS/localizer and/or pilot-controlled light-
ing frequencies.
To view the runway page from any of the airport information pages:
1. Rotate
O
with the flashing cursor removed to display the runway page.
2. To view additional runway information, rotate K with the flashing cursor removed.
The scrolling arrow prompt, located beside the identifier field, indicates which direction to
scroll for additional runway information.
If a localizer and ILS are used on the same runway, rotating K will display
both sets of information.
The following descriptions and abbreviations are used on the airport runway
page:
Runway surfaces:
• hard - Hard (concrete, asphalt, etc.) • turf - Turf (grass)
• seal - Sealed surface • grav - Gravel surface
• dirt - Dirt surface • soft - Unknown soft surface
• unkn -Unknown surface • watr - Water landing site
Runway lighting:
• pt lights - Part time lights
• ft lights - Full time lights
• pc - Pilot controlled (with frequency)
• no lights - No runway lighting
40
REFERENCE
Autostore ™ &
User Comments
To view additional runways, rotate the inner knob
in the direction of the arrow prompts.
Airport Runway Page for KICT.
SECTION
3
WPT KEY
Airport
Runway Page
250 real 7/14/98 9:32 AM Page 40